Technical Sheets - Adjustable Heads

Adjustable heads can be used on projects where lateral or bending forces are not an issue. Their threaded rod makes final leveling of the head in the field quick and easy. This makes them ideal for light construction and residential projects. Adjustable heads connect to the piles with adapters. Where pull-out forces are an issue, a wind-lift adapter must be used.

Adjustable heads can be used on projects where lateral or bending forces are not an issue. Their threaded rod makes final leveling of the head in the field quick and easy. This makes them ideal for light construction and residential projects. Adjustable heads connect to the piles with adapters. Where pull-out forces are an issue, a wind-lift adapter must be used.

Standard adjustables heads​

Standard adjustables heads

Simple heads with square plates in 3.5″, 5″ or 8″ sizes. Can be attached to wood or steel structures with the 4 lag bolts or bolt holes at the base.

Product Dimension Technical sheet Revit
TAS3C 3 1/2" x 3 1/2" Centered PDF icon Revit icon
TAS3O 3 1/2" x 3 1/2" Offset PDF icon Revit icon
TAS5C 5 1/2" x 5 1/2" Centered PDF icon Revit icon
TAS5O 5 1/2" x 5 1/2" Offset PDF icon Revit icon
Product Dimension Technical sheet
TAS3C 3 1/2" x 3 1/2" Centered PDF icon
TAS3O 3 1/2" x 3 1/2" Offset PDF icon
TAS5C 5 1/2" x 5 1/2" Centered PDF icon
TAS5O 5 1/2" x 5 1/2" Offset PDF icon
Adjustable Heads​

U-shaped adjustable heads

U-shaped opening from 3.5” to 8” to fit all common frame types. Can be attached to frames with 1/2″ lag screws or bolts. However, the use of edge-to-edge screws is recommended.

Product Dimension Technical sheet Revit
TAU4 For 4" X 4" beam (Interior 3 1/2") icon pdf Revit icon
TAU5 For 4 1/2" X 3 1/2" beam (Interior 4 5/8") icon pdf Revit icon
TAU6 For 6" X 6" beam (Interior 5 1/2") icon pdf Revit icon
TAU6+ For 5 1/2" X 5" beam (Interior 6 1/8")  icon pdf Revit icon
TAU8 For 8" X 8" beam (Interior 7 1/2")  icon pdf Revit icon
TAU8+ For 8" X 8" beam (Interior 8 1/8")  icon pdf Revit icon
Product Dimension Technical sheet
TAU4 For 4" X 4" beam (Interior 3 1/2") icon pdf
TAU5 For 4 1/2" X 3 1/2" beam (Interior 4 5/8") icon pdf
TAU6 For 6" X 6" beam (Interior 5 1/2") icon pdf
TAU6+ For 5 1/2" X 5" beam (Interior 6 1/8")  icon pdf
TAU8 For 8" X 8" beam (Interior 7 1/2")  icon pdf
TAU8+ For 8" X 8" beam (Interior 8 1/8")  icon pdf
tal

L-shaped adjustable heads

Ideal when framing beams are not standard size. Head has a 6″ base plate with no edge on one side so it slides easily under the structure being supported. Can be securely attached to framing with ½” lag screws. To best resist pull-out forces, the use of four lag screws is recommended.

Product Dimension Technical sheet Revit
TAL6 Base: 6" x 5", Vertical : 6 1/4" x 5" icon pdf Revit icon
Product Dimension Technical sheet
TAL6 Base: 6" x 5", Vertical : 6 1/4" x 5" icon pdf

What types of structures can you connect Postech adjustable heads to?

Wood structures

You can connect Postech fixed heads directly to wooden structures using bolts, lag screws or any other suitable structural fastener.

Steel structures

Postech fixed heads can be bolted or welded directly to steel structures, depending on the project.

Close-up of adjustable screw pile heads installed along a concrete foundation for precise leveling and support.

Concrete structures

You can connect Postech fixed heads to concrete structures. Our standard concrete heads can be anchored with sufficient concrete cover; rebar can be welded to the head on site to facilitate connection to the concrete reinforcement. Our engineering team can also design custom anchoring heads to accommodate specific loads.

You need more information?

Contact your local dealer

You need more information?

Contact your local dealer